No Man’s Sky – Frontiers: The Extended Colour Pallet Guide

How to apply texture options and colour options on all parts (texture option changes dont affect all parts and some parts simply cant be recoloured. This tends to be things in the decorations tabs such as the new lights and stuff). No Mods are needed to achieve this.

Guide to Apply Texture Options and Colour Options

Simple Retexturing

Warning! It works on Legacy Metal, and some of the the industry/power parts.

  • Open parts menu.
  • Go into decoration tab.
  • select a part form “structural adornments” such as pyramid or cube.
  • Retexture it to desired retexture in the colour menu.
  • Go back into parts menu menu. Becareful though exiting the build menu means you have to start again.
  • Go to part you want to use. When placed you will notice it has the retexture. As long as you don’t exit build mode you will have the texture applied to all parts that can have it applied..
  • Placed parts can be recoloured (only with the default set colours for that part and will keep their texture).

Simple Recolouring

Note: works on almost everything.

  • Open parts menu.
  • Select a part that has the colour you want on the final outcome.
  • Open colour menu and click on the colour you want, this should add a lil marker on the bottom right of the corner of that colour icon. You have to do this even if it is the default colour for the part.
  • Go back into parts menu and pick the part you want to use with the colour you picked. As long as you don’t exit the build mode you will have that colour on all the things you place that can be recoloured.

Using the colours from “timber” on “legacy wood” allows you to finally make brown legacy wood parts. And Old Red/White and Black/yellow on the new Alloy also looks very nice. Experiment as there are a lot of options now.

Stone walls use the “secondary” colour from the option you pick as the main, and the main colour as secondary.

Retexture and Recolouring

Note: works on stuff that can be retextured.

  • Open parts menu.
  • Select the part with the colour scheme you want.
  • Select the colour you want.
  • Go back to parts menu, and pick one of the geometric Structural Adornments. Like Pyramid for example.
  • Open colour menu but dont touch the colours.
  • Only select the texture you want, stone or rust.
  • Go back to parts menu and select the Legacy metal part you want.
  • As long as you dont exit the build menu, you will be able to keep placing parts with that colour/texure combo. If you accidently exit menu, then start again.
  • Most things that are not Legacy Metal or Industry parts that have retexture capabilities will already have them in the colour menu, so you would simply pick that part instead of step 2-4 and you would have the result you want.

Written by Kodi Sky

Be the first to comment

Leave a Reply

Your email address will not be published.