List of all the part that need to be repaired or replaces for each mission.
Contents
Diesel Jobs
#01
It appears that the cause of the locomotive’s malfunction is a damaged carriage. Probably they are the steel and rubber springs. Locate the exact cause of the defect and replace with a new part!
Parts:
- Steel and rubber springs.
- Steel and rubber springs.
#02
Locate the faulty components of the braking system in the front truck.
Parts:
- Brake caliper.
- Brake caliper arm.
- Hydraulic brake piston.
#03
Just as we expected, the problem proved to be damaged transmission in the truck. Remove and replace them.
Parts:
- Drive gear.
- Drive gear.
#04
It appears that the problem is damaged engine mounting in both trucks.
Parts:
- Engine mounting.
- Engine mounting.
- Engine mounting.
- Engine mounting.
- Electric motor mounting brackets.
- Electric motor mounting brackets.
#05
Make necessary repairs to the truck assembly. Remember to check all relavant elements that could be damaged.
Parts:
- Hydraulic brake piston connector.
- Hydraulic brake piston connector.
- Hydraulic brake hose.
- Steel and rubber springs.
- Axle box.
- Axle box.
- Damper of axle box.
- Damper of axle box.
#06
It appears that the brake system is damaged. Find the cause of the defect and make repairs.
Parts:
- Wheel axel.
#07
Find the casue of the defect in the traction motors.
Parts:
- Drive gear.
- Electric motor rotor shaft.
- Electric motor cover.
- Engine mounting.
#08
It appears that engine parts are damaged. Make the neccessary repairs!
Parts:
- Fuel hose connector.
- Fuel hose connector.
- Fuel hose connector.
- Valve cover.
#09
The probable cause of the damage is the malfunction of the one exhause system components of the locomotive’s engine – throttle valves are suspected. Find the cause of the damage.
Parts:
- Hydraulic throttle mechanism.
- Hydraulic throttle mechanism.
- Hydraulic throttle mechanism.
- Hydraulic throttle mechanism.
- Valve cover.
#10
Replace the flywheel that is causing this problem/
Parts:
- Flywheel.
#11
Check the locomotive’s brake system and make the necessary repairs.
Parts:
- Hydraulic brake hose.
- Hydraulic brake hose.
- Hydraulic brake piston.
- Hydraulic brake piston.
- Hydraulic brake piston connector.
#12
The train has a problem with the fuel tank.
Parts:
- Fuel tank.
#13
Repair the diesel engine.
Parts:
- Valve cover.
- Valve cover.
- Combustion chamber cover.
- Engine valve.
- Engine valve.
- Engine valve.
- Glow plug.
- Engine valve spring.
- Valvle tappet.
- Camshaft.
#14
Replace all the damaged brake pistons in the locomotive. Check each of them carefully.
Parts:
- Hydraulic brake piston.
- Hydraulic brake piston.
- Hydraulic brake piston.
- Hydraulic brake piston.
- Hydraulic brake piston.
- Hydraulic brake piston.
Repair the other components of the braking system.
Parts:
- Hydraulic brake piston connector.
- Brake caliper arm.
- Brake caliper arm.
- Brake caliper arm.
- Brake caliper.
#15
It appears that the shock absorber in the hydraulic suspenion are damaged, but it may not be the main cause of the problem. Examine the all elements of the suspension system.
Parts:
- Steel and rubber springs.
- Steel and rubber V-form spring.
- Steal and rubber V-form spring.
- Hydraulic shock absorber.
- Hydraulic shock absorber.
- Axle box.
#16
As the result of a collision with an unknown object the traction axles of the locomotive were damaged. Check the condition and make the necessart repairs.
Parts:
- Wheel axle.
- Wheel axle.
- Axle box.
- Axle box.
- Damper of axle box.
- Steel and rubber V-form spring.
Check that the rear truck has not beem damaged.
Parts:
- Hydraulic brake hoses.
- Damper of axle box.
- Hydraulic shock absorber.
#17
Replace the mounting of the traction motor in the front truck.
Parts:
- Engine mounting.
- Electric motor mounting brackets.
- Electric motor mounting brackets.
- Truck frame.
Check if any other parts also need to be replaced.
Parts:
- Electric motor cover.
- Electric motor rotor tip shaft.
- Brake caliper.
#18
Repair the front truck frame.
Parts:
- Truck frame.
Repair the worn part of the front truck frame.
Parts:
- Steel and rubber springs.
- Steel and rubber springs.
- Steel and rubber springs.
- Steel and rubber springs.
- Hydraulic brank piston connector.
- Hydraulic brank piston connector.
- Hydraulic brank hoses.
- Brake caliper arm.
- Brake caliper arm.
Replace the worn part of the rear truck frame.
Parts:
- Brake caliper.
- Brake caliper.
- Hydraulic shock absorber.
- Steel and rubber springs.
#19
It appears that one of the truck frams broke – check whch of them is damaged and make the necessare repairs.
Parts:
- Truck frame.
#20
It appears that there is some damage to the train’s engine and truck assembly. Identify and repair them.
Parts:
- Steal and rubber V-form spring.
- Axle box.
- Truck frame.
- Motor power supply cable.
- Motor power supply cable.
- Drive gear.
- Valve cover.
- Fuel hose connector.
- Fuel hose.
- Fuel hose.
#21
It appears that components of the locomotive’s suspention have been damaged – identify the parts required to repair it and make the repairs.
Parts:
- Steel and rubber V-form spring.
- Damper of axle box.
- Steel and rubber V-form spring.
#22
#23
It appears that the damage to the engine coating is very serious – check its condition and make the necessary changes.
Parts:
- Piston.
- Piston handle.
- Piston handle.
- Piston handle.
#24
It appears that all the traction motors and a bew brank components are damaged. Repair the necessary elements.
Parts:
- Brake caliper.
- Electric motor rotor tip shaft.
- Electric motor rotor tip shaft (bugged?).
- Motor power supply cable.
- Hydraulic brank piston.
#25
This train is located in A2.
It looks like the oxygen tank is airlocked. Check and remove the problem.
Parts:
- Compressed air tank.
Electric Jobs
#01
It appears that the cause of the damage is the engine’s mounting brackets – replace or repair them.
Parts:
- Engine motor mounting brackets.
- Engine mounting.
#02
It appears that the cause of the defect is defected transmissions.
Parts:
- Drive gear.
- Drive gear.
#03
Most likey the problem concerns the batteries in the locomotive. Check that they are good and make the necessary repairs.
Parts:
- Battery.
- Battery.
- Battery.
- Battery.
Check if the fuses are burned.
Parts:
- 30 amp fuse.
- 15 amp fuse.
- 25 amp fuse.
#04
The problem is a loss of compressed air – check the tanks located in the vicinity of the vehicle’s desgin points.
Parts:
- Large compressed air tank.
- very large compressed air tank.
Probably the compressor is also damaged. Check it and if necessary make repairs.
Parts:
- Truck frame.
#05
It appears that the pantographs are damaged. Check what parts are damaged and make the necessary repairs.
Parts:
- Pantograph slider.
- Pantograph slider.
- Pantograph spring.
- Pantograph tube 2.
- Pantograph tube 1.
#06
Check the condition of the front pantograph.
Parts:
- Pantograph tube 5.
- Pantograph spring.
- Pantograph slider.
Check the condition of the rear pantograph.
Parts:
- Pantograph frame.
#07
The locomotive has a damaged water and oil cooling system. Find and remove the cause of the defects.
Parts:
- Water and oil cooling system.
- Smaller pipe in the cooling system.
- Water and oil cooling system.
- Smaler pipe in the cooling system.
- Cooling system pipe.
In addition, check the conditions of the batteries.
Parts:
- Battery.
- Battery.
#08
This train is located in C1.
It appears that the damages to teh locomotive are serious. Find all the damaged components and replace them.
Parts:
- Engine mounting.
- Damper of axle box.
- Damper of axle box.
- Damper of axle box.
- Cooling system pipe.
- Damper of axle box.
- Axle box.
Check the condition of the fuses.
Parts:
- 15 amp fuse.
- 25 amp fuse.
#09
This train is located in A3.
The probable cause of damage is the failure of one of the elements of the power drive unit.
Parts:
- Traction converter.
- Traction converter.
The pantograph have also been damaged.
Parts:
- Pantograph tube 3.
- Pantograph tueb 1.
- Pantograph slider.
- Pantograph slider.
- Pantograph spring.
Chaeck the condition of the fuses.
Parts:
- 5 amp fuse.
- 5 amp fuse.
- 5 amp fuse.
- 10 amp fuse.
- 10 amp fuse.
- 20 amp fuse.
- 25 amp fuse.
- 25 amp fuse.
#10
It appears that teh electrical power transformer is damaged. Replace it.
Parts:
- Traction converter.
#11
It appears that teh truck assembly is damaged. Replace the necessary elements and inspect the remaining parts.
Parts:
- Wheel axle.
- Axle box.
- Axle box.
- Damper of axle box.
#12
One of the traction converters is damaged. Identify it and make the necessary repairs.
Parts:
- Traction converter.
Replace the burned out front engine coil in the rear truck.
Parts:
- Electric motor coil.
#13
Make repairs to worn parts in the fire extinguishing system.
Parts:
- Fire extinguisher.
- Fire extinguisher.
- Valve.
- Set of switches.
Optionally replace/check the condition of the batteries.
Parts:
- Battery.
- Battery.
- Battery casing.
- Battery.
#14
It seems that the famage is no serious, but it affected the truck assembly.
Parts:
- Truck frame.
- Steel and rubber V-form spring.
- Steel and rubber V-form spring.
- Axle box.
- Steel and rubber V-form spring.
- Axle box.
- Axle box.
- Steel and rubber V-form spring.
- Steel and rubber V-form spring.
- Steel and rubber V-form spring.
Optionally, check the condition of the pantographs.
Parts:
- Truck frame.
#15
The case of the derailment was faulty brake system components. We suspect piston damage.
Parts:
- Brake caliper arm.
- Brake caliper arm.
- Brake caliper.
- Brake caliper.
- Brake caliper.
- Brake caliper.
Check the condition of the siren on the roof.
Parts:
- Siren.
#16
#17
Fortunately, the damage did not appear to be very serious and only all the fire extingishers on the electric locomotive requre replacement.
Parts:
- Traction motor blowers.
- Traction motor blowers.
- Traction motor blowers.
- Traction motor blowers.
Probaly a fuse also burnt out.
Parts:
- 10 amp fuse.
#18
#19
Check what parts of the pantographs were damaged and make the necessary repairs.
Parts:
- Pantograph spring.
- Pantograph frame.
- Pantograph tube 2.
- Pantograph spring.
- Pantograph tube 2.
- Pantograph tube 1.
Chech the condition of the batteries.
Parts:
- Battery.
- Battery.
- Battery.
#20
It appears that the probelm is one of the large electric boxes in the locomotive. Inspect them and then eliminate the problem.
Parts:
- Auxoliary transformer box.
- Traction converter.
Check the condition of the fuses.
Parts:
- 20 amp fuse.
- 20 amp fuse.
- 10 amp fuse.
- Truck frame.
There was also a report that the siren dose not operate.
Parts:
- Siren.
Steam Jobs
#01
Repair the brake claipers.
Parts:
- Brake caliper.
- Brake caliper.
- Brake caliper.
#02
It appears that teh wheels in the front truck have been damaged.
Parts:
- Truck wheel.
- Truck wheel.
- Truck wheel.
- Truck wheel.
Replace the front blade.
Parts:
- Front blade.
#03
It appears that teh steam engine’s truck assembly is damaged. Find the damaged parts and make repairs.
Parts:
- Large drive wheel.
- Large drive wheel.
- Large drive wheel.
- Large drive wheel.
Check the condition of the brake calipers.
Parts:
- Brake caliper.
- Brake caliper.
#04
Repair the rear wheels and their axles.
Parts:
- Rear wheel.
- Rear wheel.
- Real axle.
Repair the suspention of the rear wheels.
Parts:
- Rear axle spring leaf.
- Rear axle spring leaf.
#05
The left piston tank was damaged.
Parts:
- Pistone tank v2.
Replace the piston tank pipe
Parts:
- Large drive wheel.
Repair the piston and the piston grip.
Parts:
- Piston.
- Piston tank v2.
#06
The wheels are blocked and locomotive could not move. Find the casue of the defect.
Parts:
- Wheel connector.
- Wheel connector.
- Connecting rod.
#07
It appears that the front cylinder was damaged due to too much pressure. Make the necessare repairs.
Parts:
- Smoke box.
#08
Repair the front of the locomotive.
Parts:
- Front blade.
- Cooler.
- Steps.
- Steps.
Repair the front light and the signal bell.
Parts:
- Head light.
- Bell.
#09
It appears that the large tank pipe from the cabin is damaged.
Parts:
- Pipe set 9.
- Pipe 11 of the large tank.
- Pipe 13 of the large tank.
#10
The lack of power is due to leakage of the piston tanks.
Parts:
- Piston tank.
- Piston tank.
Check the conditions of the pipes leading to the piston tanks.
Parts:
- Nozzle pipe v2.
- Nozzle pipe v1.
- Nozzle pipe v2.
#11
Check the condition of the brake system.
Parts:
- Brake caliper.
- Brake caliper.
- Brake caliper.
- Brake caliper.
Check the condition of the suspenion.
Parts:
- Rear axle spring leaf.
- Rear axle spring leaf.
#12
Train was located on the B1, C1 boder, after a game restart.
It appears that the control system of the brake system us damaged. Find the casue and repair the porblem.
Parts:
- Brake assembly.
- Brake lever.
- Brake systme control pipe.
Check if the brake calipers require replacment.
Parts:
- Brake caliper.
- Brake caliper.
- Brake caliper.
#13
The ddamages are relatively serious. Some wheel connectors are rods need to be replaced.
Parts:
- Wheel connector.
- Wheel connector.
- Connecting rod.
- Wheel connector.
- Wheel connector.
Some of the springs have been damaged.
Parts:
- Leaf spring.
- Leaf spring.
- Leaf spring.
- Rear axle spring leaf.
Check if any of the drive wheel axles require repair.
Parts:
- Drive wheel axle.
#14
Replace all the presure indicators in the cabin.
Parts:
- Brank system presure gauge.
- Steam tank presure gauge.
- Main tank presure gauge.
- Small pressure gauge.
Check why the door hatches are jamming.
Parts:
- Left door hatch.
- Right door hatch.
Be the first to comment