Let you enter anywhere even you don’t have the access.
Contents
Guide to Door Hacking
All credit goes to Tannco!
Chapter 1. Airlock Lockpicking
You’ll need: Screwdriver, Wirecutter, Crowbar
- Use screwdriver to open the airlock panel
- Use wirecutter to cut off the Power
There’s one wire will bolt the airlock, which make it unpickable, you need a multitool to reset if it’s bolted.
- Use crowbar to crank to the airlock open.
Chapter 2. Airlock Deaccess
You’ll need: Welder, Screwdriver, Crowbar
If you are afraid of the airlock being bolted while you lockpicking it, this method is for you.
- Use welder to weld the airlock
- Use screwdriver to open the airlock panel
- Use crowbar to remove the door electronic part
- Reinstall the door electronic part
- Use screwdriver to install the airlock
Now you have deaccess the airlock, anyone now can access this airlock.
Chapter 3. Wall Deconstruct
You’ll need, Welder, Wrench, Screwdriver(optional)
- Use welder to weld the wall
- Use wrench to unanchor the wall frame
- Use screwdriver to deconstruct the wall frame
You can just simply push the wall frame away while it being unanchor to skip the screwdriverpart.
Chapter 4. Reinforced Wall Deconstruct
You’ll need: Screwdriver, Wirecutter, Welder, Crowbar, Wrench
The deconsrtuct procedure is by fallowing:
- Wirecutter, Screwdriver, Welder, Crowbar, Wrench, Welder, Crowbar, Screwdriver, Wirecutter
After this, reinforced wall will turn into wall frame, just like normal wall frame, you can unanchor it with wrench and push it away or deconstruct with screwdriver.
Chapter 5. Window Deconstruct
You’ll need: Screwdriver, Wrench
- Use screwdriver to screw the window
- Use wrench to deconstruct the window
Chapter 6. Reinforced Window Deconstruct
You’ll need: Screwdriver, Wrench, Crowbar
The procedure to deconstruct is by fallowing:
- Screwdriver, Crowbar, Screwdriver, Wrench
If you can’t memorize that, you can just throw(Ctrl+Q) spear to break the window.
Be the first to comment