Wrack – How to Fix Resolution Issues

If you are having issues where the game launches in a too high resolution and cuts off the menu leaving you unable to go into settings and set the correct res then this guide is for you.

Fixing Resolution

If you need to edit the Wrack’s resolution but can’t get to the settings menu in-game then you can edit the config which is located here: %APPDATA%\Wrack\Wrack-<user-id>.ini

After you open the config search for the following lines:

  • vid_screenwidth=
  • vid_screenheight=

I would recommend setting them to something lower than your native res. I set mine to 1920×1080 and was then able to go to the settings menu in-game and bump it back up to 3840×2160.

If you need to set it lower than 1080p then you can use 720p: 1280×720 or even 1024×768

It’s a quick and easy fix, I hope this helps someone else out there.

Be the first to comment

Leave a Reply

Your email address will not be published.