This guide will tell you how to indefinitely run your cyclops.
What You Need
You need quite a few things, but it is for sure worth it.
- A cyclops.
- 6 Power cells.
- The materials to build 3 power cell chargers.
This is a lot more than you think it is, but it is possible to get it. Personally, I think the three advanced wiring kits are the hardest to get.
Once you’ve gathered the materials, it’s time put it to action. I also recommend putting a fabricator and a bed inside of your cyclops.
- Place the three power cell chargers with the Habitat builder inside your cyclops.
- You are done!
Yep, you have prepared everything. To use this contraption you have built, just switch the power cells that are powering your cyclops to the charger. Then, place your extra cells inside where the other ones were. I recommend doing this at around 60% so you still have enough power to charge the cells and use your cyclops at the same time.
Using this technique, you can essentially ditch your old base and use your new and improved submarine one!