Shapez 2 – Wired Fluid Depot + Selector – 4×4 Belt Output Blueprint

September 1, 2024 Volodymyr Azimoff 0

Wired Fluid Depot + Selector – 4×4 Belt Output

By Nitrrose.

A fluid depot for a MAM I made using the new pipe filters. It takes in 2 notches of red, green and blue fluid each, and outputs 4×4 full belts of fluid.

The extra 2×1 platforms have prefab wiring where each layer of the shape is transmit over, but you should replace them with your own layer finders. Each wire notch corresponds to one module of the fluid selector. (See annotated image for more info).

The space pipes at the bottom of the BP are the outputs of each module, with the leftmost module on the left. (Who would’ve guessed).

Probably insanely unoptimised and my wiring is total s***, but it works.

Google Drive Link (45 Kb).

Click to enlarge…

That concludes the guide, hope you found it helpful!

Shapez 2

About Volodymyr Azimoff 7969 Articles

I love games and I live games. Video games are my passion, my hobby and my job. My experience with games started back in 1994 with the Metal Mutant game on ZX Spectrum computer. And since then, I’ve been playing on anything from consoles, to mobile devices. My first official job in the game industry started back in 2005, and I'm still doing what I love to do.