12 Lane 4 Layer TMAM with Pins and Color
By Floppi.
My take on a TMAM with full 12 lanes and 4 layers of shapez. You just have to bring in 4 full shapez + 1 full shape of pins and the three colors red, green and blue. (Red on bottom, green middle, blue on top).
Tooks about 5 minutes for the first correct shape to be loaded onto the train station and about 7:30 minutes for the first wagon to be loaded. Dependend on get rid of not used color in the MAM.
Struggled on the logic to get the first and second layer of the shape dependend if there are 1, 2, 3 or 4 layers. Sure this could be done easier. But it works.
You can set a custom shape or random shape 0 on the layer logic board of layer 1. This is system wide.
- Google Drive Link (208 Kb).
Click to enlarge…
Be the first to comment