Steam Engine Simulator – How to Get 3500 RPM Fast

In this guide, I will describe step by step, how to get near 3500 RPMs.

Steps

  1. Open the game
  2. Enter devil mode by clicking the A at the bottom right of the screen
  3. Disable the Relief Valve by pressing X
  4. Close the drain valve
  5. Open the Brake to 0% by pressing 2 + scroll
  6. Open the water valve and fill it until (full close the valve if full) (to fully fill it up make sure the throttle valve is open)
  7. Close the Throttle Valve
  8. Turn on heat 100%
  9. Rotate the engine until its slightly tilted left
  10. Wait till PSI is 350 and Temperature at near 300 then open the throttle to 39% to help maintain your speed (if the engine got stuck maybe it wasn’t tilted left)
Volodymyr Azimoff
About Volodymyr Azimoff 13521 Articles
I love games and I live games. Video games are my passion, my hobby and my job. My experience with games started back in 1994 with the Metal Mutant game on ZX Spectrum computer. And since then, I’ve been playing on anything from consoles, to mobile devices. My first official job in the game industry started back in 2005, and I'm still doing what I love to do.

3 Comments

  1. I got the achievement using this, Thanks! I actually got mine all the way up to ~4260rpm (still climbing when i was messing around with it). Open the throttle valve slowly to 54%, not a bit more. If you go to 56%, it stalls out and slows down

  2. I can confirm this does work however I would recommend about 190-210 degrees instead of slightly to the left.

Leave a Reply

Your email address will not be published.


*