In this guide I will tell you how to get to a facility that lets you test the limits of your truck. NOTE: Requires Washington DLC.
How to Get There from Seattle
Сrеdit gоеs to SuperPizza !
Go north on interstate 5, and take the third exit north of Everett then take a left to the stoplight. Turn right.
The map will show there as being no road there, but there will be no blockers so you can take it. You will take this road for a little bit and to the right you will see the facility.
To open the gate complete the security check. Follow the sign that says “Deliveries.”
How to Get There from Bellingham (Recommended)
Go south on interstate 5, and take the second exit to the south, turn left then take another a left to the stoplight. Turn right.
The map will show there as being no road there, but there will be no blockers so you can take it. You will take this road for a little bit, and to the right you will see the facility to open the gate complete the security check.
Follow the sign that says deliveries.
In the Facility
Once you enter you will want to keep left until the third gate, where you can go either way. After the second gate there is a parking lot with a gas station.
A little farther on you will see a DAF XD truck recently added to Euro Truck Simulator 2.
To the right you will see some trucks parked. If you park between the cones you are given the option to sleep.
If you go to the right you can go on the speed test track.
You can also go across the speed test track. From there you can go right to take a series of durability tests, each marked by a sign. Note that the corrosion pit does not work.
Just remember you cannot have any mods running
Is there trailer parking, I pass near the area all the time, but I’m always hooked to a trailer.
There are some places in the facility to park your trailer if you go down a gravel road in the center of the speed test track. There is also an area before the gate where you can park your trailer. I hope that helps.