Train Sim World 4 – Comprehensive DB BR 185.2 Guide (Procedures, Unique Features & Cab Controls)

DB BR 185.2

Overview

As part of the TRAXX family, the DB BR 185 is one of Germany’s prime freight locomotives, used throughout the country to haul all manner of goods. Hundreds have been built since the order was first placed in the late 1990s, making them a common sight. DB operate a substantial fleet of locos, with many still carrying the DB Railion brand, a name for DB Cargo which dates back to the turn of the century, 2000.

Of that fleet, many are of the F140 AC2 variant (one of many available as part of the family) offering powerful cross-border capabilities for all manners of freight operations. This subset of locomotive was more specifically classified as the BR 185.2, and is a frequent sight across Europe, as are TRAXX’s as a whole.

• Manufacturer: Bombardier Alstom
• Build Location: Kassel, Germany
• Build Date: 1999-2006
• Number Built: 200 locos
• Power Type: 15kV AC OHLE
• Variant: TRAXX F140 AC2
• Power Output: 7500 horsepower
• Length: 18.9 Metres (62 ft)
• Weight: 84 Metric Tons
• Top Speed: 140km/h (87mph)

DB BR 185.2 Cab – 1/3

• 1 – Emergency Brake Button
• 2 – Air Compressor Switch
• 3 – Traction Motor Fan Switch
• 4 – LZB/PZB Override Button
• 5 – LZB/PZB Release Switch
• 6 – LZB/PZB Acknowledge Switch
• 7 – Pantograph Switch
• 8 – Main Circuit Breaker Switch
• 9 – Train Line Power Switch
• 10 – AFB Speed Handle
• 11 – Reverser Handle
• 12 – Throttle Handle
• 13 – Sand Switch
• 14 – Brake Release Switch
• 15 – Headlights Switch
• 16 – Master & Instrument Lights Switch
• 17 – Cab Lights Switch
• 18 – High Beam Indicator Button
• 19 – Train Brake Handle
• 20 – Electric Brake Handle
• 21 – Direct Brake Handle
• 22 – Passenger Doors Switch
• 23 – Horn Lever
• 24 – Emergency Pantograph Button
• 25 – Shunting Control Switch
• 26 – LZB/PZB Release Switch
• 27 – LZB/PZB Acknowledge Switch
• 28 – LZB/PZB Override Button
• 29 – Direct Brake Gauge
• 30 – Train Brake Gauge
• 31 – Brake Overcharge Button
• 32 – Right Multi-Function Display
• 33 – Multi-Function Display (Tractive Effort)
• 34 – Multi-Function Display (Speedometer)
• 35 – Left Multi-Function Display

DB BR 185.2 Cab – 2/3

• 36 – AFB Switch
• 37 – Console Lights Button
• 38 – Console Light Dimmer Dial
• 39 – Contact Signaller Phone
• 40 – en/pl Switch
• 41 – PZB Mode Switch
• 42 – Wiper Switch
• 43 – Emergency Brake Valve Handle
• 44 – SIFA Reset (foot pedal behind seat)

DB BR 185.2 Cab – 3/3

• 45 – LZB Breaker Switch
• 46 – PZB Breaker Switch
• 47 – SIFA Breaker Switch
• 48 – Signal Lights Switch
• 49 – Parking Brake Apply Button
• 50 – Parking Brake Release Button
• 51 – Battery Button
• 52 – Brake Selector Switch
• 53 – Pantograph Selector Switch
• 54 – Driver’s Brake Valve Button
• 55 – NBÜ/EP Switch

Procedures & Unique Features

Light Setup

• As can be common on a lot of German locomotives, the DB BR 185’s headlight setup has an additional switch on the back wall which determines what state the lights should be in, the controls on the front of the desk merely control modes such as brightness.
• There is also the Master and Instrument Lights switch, this controls all lighting on the whole locomotive, so must be set to On in order for any headlight settings to function.

Brake Controls

• The DB BR 185 features 3 handles on the driver’s desk, the 2 that are side by side are the Train Brake and Electric Brake.
• When you want to decelerate, but not stop the train, you can use the Electric Brake independently, this will be able to efficiently reduce speed, but such brakes are not designed to stop the train.
• Should you need to stop, you should use the Train Brake, this is interlocked with the Electric Brake to provided a blended braking action, so you will see both handles move in unison.
• The rightmost handle is the Direct Brake, this only applies brakes on the locomotive and should only be used in light loco situations.
• The Direct Brake is a lapped brake, meaning you must hold it in the apply or release position to change brake force, and hold it in the middle to maintain that force – it is not a sprung brake, you must move it in all directions manually.

Setting AFB – Stationary

• Enabling AFB while stationary is straightforward.
• Turn on AFB using the AFB Switch, the loco with acknowledge this with an audible alert.
• Use the AFB Speed Handle to select what speed you want to maintain, and set enough throttle to reach and maintain it.
• While on the move, simply move the handle to a new speed and AFB will follow if enough throttle is applied, although it is best practice to not rely on it for braking, you should set the throttle to 0 and use manual braking.

Setting AFB – On the Move

• While on the move, set the Throttle to 0 so no power is being applied.
• Move the AFB Speed Handle all the way to maximum speed.
• Turn on AFB using the AFB Switch, the loco with acknowledge this with an audible alert.
• Use the AFB Speed Handle to select what speed you want to maintain, and reapply enough power to maintain it.