7 Days to Die – How to Create Vehicle Ramps

Creating Vehicle Ramps

All credit goes to ApeirogonGames!

In General

Use cobblestone to make flagstone blocks. The wedge tips are in the shape menu there. To make the wood wedges you’ll need a table saw, so might as well just use flagstone. The vehicle can still damage the block when you drive over though. Motorcycles are ok but the 4×4 will eventually break it.

Step-by-Step

1. Load your server/game.
2. Press F1 to open the console and type “dm” without the quotes and then press enter.
3. Type “cm” without the quotes and then press enter.
4. Press F1 again to close the console.
5. Press the U key to open the creative menu.
6. Search for “narrow” without the quotes and the first 4 blocks you see are the ones you need to construct a ramp that won’t damage your vehicles. They are called Wedge Narrow High, Wedge Narrow Middle, Wedge Narrow Low, and Wedge Narrow Tip.
7. If you’re trying to align the top of your ramp with the terrain, you will find that there’s a small gap your vehicles can get stuck on. Use the “plate ramp” block going up (/) and then a few “plate” blocks to space out a straight bit, then another “plate ramp” going down () to smoothly blend into the terrain.